Mycamera 1.1.2.0

Description:

Welcome to the myCamera application!
The myCamera will help you monitor and control your external FOSCAM MJPEG IP Camera.

The application is designed to interface to an external FOSCAM MJPEG IP Camera, that should be available on your local WiFi network or remotely on the internet. The user has to specify the IP Address, Password & User Name and the Camera Model through the Settings Charm.

The myCamera will monitor Sound and Motion Alarms signals from the camera

The camera can be operated on the local WiFi network or remotely over the Internet.

Make sure to follow these steps:
1. Find / Set the Local IP Address of the camera
2. Find / Set the UserName and Password
3. If interested in remote viewing Find / Set the DDNS Domain Name of the camera (on the bottom of the camera body)
4. Identify the Camera Model.
5. Start the application and activate the Settings Charm ( + I)
6. Set the IP address and the Camera
7. Set the DDNS Domain Name
8. Set the User Name & Password
9. Check / Uncheck the Local / Remote Operation
10. Set the Mode of the Camera
11. Press the Save button
12. Press the Reboot button on Settings Charm.
13. The camera should be ready in about 70 seconds
14. Wait for the camera to complete reboot and then re-start the myCamera application

When switching the camera from one mode to another, I found out that a camera reboot might be required, and the application has to be restarted, i.e. follow steps 12-14 above.

Sound/Motion Alarm: Alarm is marked with a RED border around the video image.

In order to view a test camera input, in the Camera Setting Pivot please follow these steps:
1. Set Remote DDNS Domain to: ah7898
2. Uncheck the Remote
3. Set User Name to: TEST
4. Leave Password empty

If you have a problem connecting with the camera, please contact us: ytdassoc@gmail.com

All data you enter using this application is kept locally only, on your device!